Plumbing Supplies

• Ergonomic handle with two electrodeposited tungsten carbide inserts of high abrasion resistance.

• Can be used with 1, 2 or 3 plates depending on the joint width.

• Each electrodeposited tungsten carbide insert is 2mm thick. Minimum joint to work with this scraper is 2mm, up to 6mm wide.

For waterproofing pipes on trapezoidal or sinusoidal metal roofs or corrugated fibre cement roofs.

The EJOT ORKAN storm washer creates a sophisticated fastening system in combination with self-drilling and self-tapping screws.

It has a sophisticated fastening system in combination with self-drilling and self-tapping screws.

This EJOT Multigrip rivet is for side lap stitching of profiled sheet.

This screw is best for fastening of additional profiles, e.g. connecting profiles, expansion joints etc.

• To fix roofing membrane to substructures made of sheet steel ≥ 0.75 mm ≤ 1 mm.
• For combination with EJOT® stress plates.

• Efficient spaced fixing of windows and doors
• Especially suited for PVC outer Frame without reinforcing steel rods
• Direct fastening of plastic and wooden windows in masonry and concrete, without any anchors.

For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement

Can be used with all of the most common types of screws and screw diameters.