Drill Bits & Accessories

Features - 

• Long lifetime/ Best wear resistance
• The visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting 4-cutter;
• Extremely robust and aggressive solid carbide S-cutter and inclined side cutters for an aggressive drilling rate
• optimised flute design for the best power transfer and speed
• The visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting

• Suitable for concrete and reinforced concrete, limestone, masonry
• For use in rotary Hammers with sds-max holder
• Material: solid Carbide

• Suitable for concrete and reinforced concrete, limestone, masonry
• For use in rotary Hammers with sds-max holder
• Material: solid Carbide

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels.
• Precision drill bits that are resistant to heat and wear.
• For use in drill stands or in pillar drills.
• The HSS-G drill bits are available in two qualities.
• The Topline drill bits are for the highest requirements and the standard drill bits are for professional use.

• Bosch offers the ideal accessories for virtually all applications
• Appropriate accessories for more efficient working
• Optimize accessories in line with the needs of users
• Flat Chisels 25mm Hex. 
• Shank flat chisel, 400mm.
• Quantity: Pack of 1.

• 25mm Hex Star point 400mm
• Content: 28mm Hex Star point 400mm

• SDS-Max drillbits are suitable for drilling into concrete, reinforced concrete, linestone and masonry
• The Ideal Drill Bit for the Professional

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Suitable for all soft and hard woods, even wet wood
• Ideal for use in ancillary building trade, for joiners and roofers
• Can be used in all drills with 13mm chuck
• For through-holes, pre drilling for rafter nails and for deep dowel holes
• Precision ground for accurate dimensional stability when drilling
• Fast drilling rate due to optimised flute geometry
• High break resistance, fine surface finish