Automotive & Safety

• The MoS2 low-viscosity engine oil creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces.
• It reduces friction, guaranteeing the aggregates run more smoothly. That produces these benefits: Significant fuel and oil saving, scientifically proven wear reduction, high reliability, antifriction properties.
• Suitable for all commercial motor oils in petrol and diesel engines with and without diesel particulate filter (DPF).
• Tested safe with catalytic converters and turbochargers. Our dosage recommendation: add from 3 – 5 % to motor oil.
• For motorcycles with wet clutches, add maximum 2 % of the oil filling volume. 

• Specially developed oil additive to extend the oil change intervals in countries with high sulfur content in the fuel.
• By increasing the neutralization capacity, the maintenance costs and the vehicle downtimes can be considerably reduced.
• The product can be added at any time.
• Can be mixed and is compatible with all commercially available four-stroke motor oils for gasoline and diesel vehicles.
• Adding to other additives such as Oil Additive, Cera Tec, etc. is possible. 

• For increasing the octane number of gasoline.
• The increase of the octane number ensures low fuel consumption.

DOT 4 quality proven millions of times

• Boiling point min - 250*C
• Wet boiling point min - 155*C
• Viscosity at - 40*C - max. 1400 mm2/s

In Stock, we have sizes 39 - 45, inform us when placing your orders. 

Upper

• Full-grain leather, waterproof

• for large containers 25 kg, movable
  • Pneumatic grease pump 1:55 with intake pipe and pumping unit
  • Delivery: approx. 600 cc/min
  • High-pressure grease gun with Z-swivel
  • Dust cover, tank fastening and grease follower piston
  • Pressure relief valve and push-on nipple
  • Carriage
  • 4 m high-pressure hose

NB - Item available on Special order only, and customer 70% prepayment is required. 

• High-performance motor oil based on synthetic technology.
• Ensures maximum performance and protection of the engine under all operating conditions.
• Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting.
• Tested on engines with catalytic converters.

• For thorough and gentle hand cleansing.
• Even removes stubborn soiling such as paint, oil and brake dust.
• Gentle on the skin and sparing in consumption.
• Dermatological tested.
• Thoroughly rub into dry hands and rinse off.

• Low-friction motor oil based on synthetic technology.
• Deposits are reliably prevented, superior lubrication reliability ensured and high fuel economy made possible.
• In regard to wear resistance the requirements of the older Ford standard WSS-M2C913-C are met and even exceeded in some aspects.
• Ford recommends its use for all engines for which oils of specifications WSS-M2C913-B, WSS-M2C913-C or WSS-M2C925-B were currently required.