Engine Oil,Fluids & Lubricants

• Optimum for modern Japanese and American gasoline and diesel engines with multi-valve technology and turbocharging with and without charge air cooling.
• Especially suitable where there are long intervals between oil changes and heavy duty engine requirements.

• For hydraulics in vehicles from various manufacturers such as ride-height control, hydropneumatic suspension, steering systems, shock absorbers, etc.
• Use in accordance with the specifications prescribed by the aggregate or vehicle manufacturer.

• Quality: DOT 3 blau
• Capacity [Litre]: 0,5
• Brake System: ATE
• Packing Type:

• Suitable for all gasoline engines with a catalytic converter.
• Protects the catalytic converter from clogging with soot. Cleans intake valves and the combustion chamber.
• Improves the combustion of the fuel.
• Clean engines reduce fuel consumption and therefore CO2 emissions.
• Prevents corrosion in the fuel system

• Suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF).
• Tested safe with catalytic converters and turbochargers. Add approx. 200 km before an oil change.
• Can contents are sufficient for up to 5 l motor oil.
• Not suitable for motorcycles with wet clutches.

- Excellent oxidation protection. 
- Qualitative separation of water. 
- Excellent compatibility with seals and paint. 
- Balanced combination of anti-foaming and de-aerating additives. 
- Maximum wear protection. 
- Ambient temperature -10 to +35 ° C

Application:

For all gasoline combustion engines (carburettor and injection). To eliminate starting difficulties, restless idling, poor engine responses to gas addition and to prevent loss of engine power. Prevents corrosive problems and prevents operational failures due to corrosion in fuel systems.

• LIQUI MOLY DOT 3 brake fluid is ideally suited to use with all disk and drum brake systems, as well as motor vehicle clutch systems for which a synthetic brake fluid of this specification is prescribed.
• The brake fluid is also ideally suited to use in ABS brake systems.
• Synthetic brake fluid based on glycol ethers and alkyl poly glycols.
•  It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures.