Bosch

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Slim design for precise positioning at the fastening point
• 2Wood Protection System means no blank firing, thus ensuring absolutely clean work
• 3Rubber-coated tip prevents damage to valuable surfaces

• Robust design with sturdy magnesium housing for high reliability in every job
• Compact tool shape also enables work in hard-to-reach areas
• Long lifetime of wear parts for more economical working

We supply T244D AND TD144D depending on customers choice

• • Designed for straight and very fast cuts in wood, OSB and plywood 1/4 In. to 2-3/8 In. thick
  • 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in wood
  • 4 In. overall length, 3 In. usable length
  • 5 piece pack

• Strong and robust motor for longer lifetime
• Higher power for faster work progress
• Good dust insulation
• Ventilation holes specially designed for dust insulation and optimal air circulation
• Flat bearing flange with channel design to prevent dust accumulation
• Ergonomic handle with dimples and soft grip for anti-slip and extra handling comfort
• Optimized gripping space for extra comfort
• Clear view of cutting line at 45° and 90°
• Compact and adjustable base plate for 45° bevel cut

• Extremely robust lever and spring construction for the highest work loads
• Powerful 2000 W motor with starting current limitation for fast work progress
• Tried-and-tested Bosch angle grinder motor provides superior product lifetime
• User-friendly quick clamping mechanism with continuously variable mitre angle setting up to 45°
• Vertical D-handle for ergonomic working
• Integrated handle for easy transport

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits
• Pack of 10

• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter

• Pack of 10

• Metal cutting disc with depressed centre
• A 30 S BF specification
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)