• Metal Grinding Disc
• Depressed Centre
• A 30 T BF specification
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)

• Metal/Stone cutting disc
• Depressed centre
• For stone for high requirements
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)

• Metal Grinding Disc
• Depressed Centre
• A 30 T BF specification
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 608 595 081) when working with HSS-G metal drill bits

Bosch WAK24210GC Automatic washing machine

The Maxx with VarioPerfect™: you decide whether washing should be super-fast or super-efficient.

• VarioPerfect TM: takes 65% less time or uses 50% less energy – thanks to freely selectable program options.
• VarioDrum: especially gentle and efficient washing thanks to a unique drum structure.
• ECARF Quality Seal: specially developed with allergy sufferers and sensitive skin in mind.
• Champion energy saver A+++: no other washer washes more efficiently.
• ActiveWater™: saves water and costs thanks to a 2-step automatic load adjustment system.

• 2-stage air flow control, 240/450 l / min, 300° - 500° C
• The unit is intended for the forming and welding of plastic, removal of paint and the warming of heatshrinkable tubing. It is also suitable for soldering and tinning, loosening of adhesive joints and the defrosting of water lines.
• Heating automatically switches off and cools when overheating, for long service life
• 2 working temperature settings

Advantages: GWM 40 Professional

The robust measuring wheel for jobsite use

• High stability and long life
• 6-digit counter, easy-to-read and impact-resistant
• Easy pushbutton reset
• Simply foldable for handy transport
• PTB certified

Advantages: GR 500 Professional

For all measurements of floor heights

• Robust, high-quality aluminium profile
• Extendible up to 5 m
• For use even under extreme conditions
• Suitable for GRL 400 H; GRL 300 HV; GRL 300 HVG; GRL 500 H/HV; GOL 20 G/D; GOL 26 G/D Professional

Advantages: GMS 120 Professional

The most reliable multi-detector in its class

• Maximum reliability: most objects are found and application errors are avoided due to the automatic calibration
• Reliable detection even of deep-lying objects – up to a depth of 12 cm
• Even more reliable detection of objects due to three-colour LED luminous ring
• Pinpoint indication of the object’s centre with the Centre Finder scale, and display of material properties
• Better visibility of the result due to illuminated display
• Marking hole with LED luminous ring
• Three detection modes for various applications: Drywall mode, metal mode, live cable mode

Features: GSR 1080-LI Professional

Powerful and reliable tool

• Interchangeability between 10.8 Volt and 14.4 Volt battery packs 
• 10.8 Volt lithium-ion drill/driver
• Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge
• No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells