Accessories

• Internal sq drive 1/2 "x11mmxM7
• Content: Internal sq drive 1/2 "x11mmxM7
• EAN: 3165140088060

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• HSS Step Drill M10-M40 (16 steps)
• High-speed steel (HSS) - ensures good cutting quality in virtually all materials
• Relief (axial and radial) - ensures maximum cutting performance and quiet running.
• Suitable for - cable glands

• 100% brand new and high quality. 
• Made from HSS-Co, heat treatment to it, high hardness, high wear resistance, high toughness, high bending strength, sharp edge, the best choice for processing stainless steel, better than ordinary step drill. 
• Unique step structure, a drill can punch out a variety diameters of holes.

• Step drill bit HSS-TiN - 6 - 30 mm, 10,0 mm, 93,5 mm

• Suitable for virtually all thin materials, e.g. non-ferrous metals, sheet steel, plastic or stainless steel.
• For burr-free drilling in thin sheet metals without pre-drilling. for deburring, for round holes, drilling several diameters with one drill bit, enlarging existing holes.
• Spiral flute for longer lifetime, less vibration and a faster drilling rate. 

• HSS step drill bits - 4 - 20 mm, 1/4", 70,5 mm

• Suitable for virtually all thin materials, e.g. non-ferrous metals, sheet steel, plastic or stainless steel.
• For burr-free drilling in thin sheet metals without pre-drilling. for deburring, for round holes, drilling several diameters with one drill bit, enlarging existing holes.
• Spiral flute for longer lifetime, less vibration and a faster drilling rate. 

• HSS step drill bits - 6 - 39 mm, 10,0 mm, 93,5 mm
• Suitable for virtually all thin materials, e.g. non-ferrous metals, sheet steel, plastic or stainless steel.
• For burr-free drilling in thin sheet metals without pre-drilling. for deburring, for round holes, drilling several diameters with one drill bit, enlarging existing holes. 

We supply T244D AND TD144D depending on customers choice

• • Designed for straight and very fast cuts in wood, OSB and plywood 1/4 In. to 2-3/8 In. thick
  • 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in wood
  • 4 In. overall length, 3 In. usable length
  • 5 piece pack