Questions? Feedback? powered by Olark live chat software

Flexible Shipping & Payment Options
Place Order on Phone: (+234) 902 04 44474
                                            (+234) 816 85 28651

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Accessories

Set Ascending Direction

   

Items 51 to 60 of 79 total

  1. 4
  2. 5
  3. 6
  4. 7
  5. 8
  1. Metal Grinding Disc with Depressed Centre 115mm - 10pcs

    • Metal Grinding Disc
    • Depressed Centre
    • A 30 T BF specification
    • Appropriate for hand-held angle grinders
    • Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)
  2. Cutting disc with depressed centre 230mm - 25pcs

    • Metal/Stone cutting disc
    • Depressed centre
    • For stone for high requirements
    • Appropriate for hand-held angle grinders
    • Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)
  3. Grinding disc with depressed centre 125mm - 10pcs

    • Metal Grinding Disc
    • Depressed Centre
    • A 30 T BF specification
    • Appropriate for hand-held angle grinders
    • Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)
  4. Metal Cutting Disc with Depressed Centre 115mm - 25pcs

    • Metal cutting disc with depressed centre
    • A 30 S BF specification
    • Appropriate for hand-held angle grinders
    • Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)
  5. Metal drill bits HSS-G, Standard (7 x 69 x 109 mm) - 10 Packed

    • Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
    • Self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter
    • Pack of 10

  6. Metal drill bits HSS-G, Standard ( 5 x 52 x 86 mm) - 5 Packed

    • Twin drill bit made of high speed steel

    • Manufactured to DIN338

    • Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

    • Shank equal to drill bit diameter

    • Two-cutter, cylindrical, two flutes

    • Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

    • Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

    • Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

    • Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

    • Pack of 10

  7. Metal drill bits HSS-G, Standard (4 x 43 x 75 mm)

    • Twin drill bit made of high speed steel

    • Manufactured to DIN338

    • Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

    • Shank equal to drill bit diameter

    • Two-cutter, cylindrical, two flutes

    • Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

    • Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

    • Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

    • Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

    • Pack of 10

  8. Metal drill bits HSS-G, Standard (3.5 x 39 x 70mm)

    • Twin drill bit made of high speed steel
    • Manufactured to DIN338
    • Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
    • Shank equal to drill bit diameter
    • Two-cutter, cylindrical, two flutes
    • Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
    • Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
    • Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
    • Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits
    • Pack of 10
  9. Diamond Cutting Disc Standard for Universal -115m

    Box Contains

    1 x Standard for Universal diamond cutting disc 

    Technical Details
     
    Part Number 2608602191
    Item Weight 118 g
    Product Dimensions 15.5 x 15.5 x 0.3 cm
    Item model number 2608602191
    Item Package Quantity 1
    Batteries Included? No
    Batteries Required? No
    Weight 120 Grams
  10. Flap Disc for Metal 115 mm, 22.23 mm, 80grit - 10pcs

    • Durable, fully synthetic, resin-bonded X-cloth with zirconia alumina for a more powerful disc.
    • Produces a consistently high removal rate on stainless steel, cast iron and steel plate.
    • Includes a fibreglass carrier plate.
    • Resin-Bonded X-Cloth