Building & Plumbing

Blueseal AG-LITE Retractable 5/8(16mm) x 50' water hose 6' inlet hose+spray nozzle.

The auto-retract hose keeps excess hose out of work space and locks it in place at different intervals.. Lightest, Strongest & Most Flexible Water hose

High strength polyester woven braided reinforcement.

Ozone resistant.

Also Suitable for Automotive & Industrial use.

1" (25MM) X 50Meters of BluBird 100% Rubber Air hose

• 100% rubber construction
• 40% lighter hose than standard rubber air hoses
• High strength polyester woven braided reinforcement
• 300 PSI working pressure
• 4:1 Safety factor
• Maintains integrity under extreme weather conditions
• Flexibility from -50°F to +190°F
• Ozone resistant
• Abrasion resistant
• Kink Resistant

Applications

• For embedment in cracked and non-cracked concrete ≥ C20/25
• Also suitable for natural stone
• Dry indoor areas
• Wet areas
• Outdoors, including in industrial atmosphere and coastal environentsFor embedment of medium heavy to heavy fixings such as pillars, metal structures and wooden structures
• For pre-, push-through and distance installations
• Seismic approval category C2 (M10-M16)

• For installation in cracked concrete (option 1) and non-cracked concrete (option 7) (ETA-16/0107)
• For installation in masonry (ETA-16/0089)
• Approved for anchor rods M8, M10, M12, M16, M20, M24

• 8 mm nylon plugs for push-through installations for fixing wooden structures.
• Also when slimmer frame plug and smaller loads are required.
• Cr VI-free coating of the screw.
• ZP for dry indoor and temporary outdoor use.

• Preassembled with nailscrew, ready-to-install nylon speedplugs for hammer-in -type through fixings.
• Nailscrew head with pozidrive slot for removing or adjusting the anchor.
• Plug collars function as plastic insulating washers thus preventing touch-corrosion from taking place.
• ZP for dry indoor and temporary outdoor use.

• For fastening elevated solar and photovoltaic installations to steel substructures 1.5 - 3 mm
• Can also be used for steel substructure ≥ 3.0 mm if predrilled
• For high-strength steel substructures up to S450GD
• Suitable for metal trapezoidal and corrugated profile sheets and sandwich panels.

The EJOT® Flat roof profile FP offers a reliable and efficient solution for flat roof installations. Designed with precision, this profile ensures secure fastening for various roofing materials. The EJOT® Flat roof profile FP is engineered  to deliver high performance, making it an ideal choice for dependable and long lasting flat roof constructions.

Depending on the temperature, mortar cartridges require higher contact forces (~ 1 kN) than e.g. silicone cartridges. These applicator guns feature an appropriate transmission ratio.