Building & Plumbing

For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement

Can be used with all of the most common types of screws and screw diameters.

• 8 mm nylon plugs for push-through installations for fixing wooden structures.
• Also when slimmer frame plug and smaller loads are required.
• Cr VI-free coating of the screw.
• ZP for dry indoor and temporary outdoor use.

• Preassembled with nailscrew, ready-to-install nylon speedplugs for hammer-in -type through fixings.
• Nailscrew head with pozidrive slot for removing or adjusting the anchor.
• Plug collars function as plastic insulating washers thus preventing touch-corrosion from taking place.
• ZP for dry indoor and temporary outdoor use.

• Universal polyethylene plug with collar for pre-installation in all types of base materials.
• Due to knotting YLT can be used in most base materials.
• Collar prevents the plug from slipping into the drill hole.
• Suitable for wood and chipboard screws.
• Suitable conditions related to screw material: ZP for dry indoor and temporary outdoor use; HGD/MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use.

• Multipurpose quality nylon plugs for push-through and pre-installations in solid base materials.
• Suitable for wood and chipboard screws, double threaded screws, adjustable frame screws and other spacing screws
• Suitable screw length = plug length (L) + fixture thickness (tfix) + 5 mm.
• Temperature range in use -40 °C to +80 °C.
• Suitable conditions related to screw material: ZP for dry indoor and temporary outdoor use; HGD, MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use.

• Fastening of tilt and turn fittings in regular and thin-walled PVC profiles and in steel or GRP inserts
• Fixing locking plates, strips and bearings.

This EJOT Multigrip rivet is for side lap stitching of profiled sheet.

It has a sophisticated fastening system in combination with self-drilling and self-tapping screws.

• Power plants
• Guard rails
• Machinery
• Base plates
• For dynamic and seismic loads
• Small edge and center distances