Home & Outdoor

• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

Approved for;

• Cracked concrete
• Pre-stressed hollow core slab
• Non-cracked concrete
• Solid clay brick
• Solid sand-lime brick

Approved for

• Cracked concrete
• Non-cracked concrete

Technical specifications

• Galvanized zinc-plated steel
• Internal thread for metric screws and rods
• The suitable bolt length is 1-1.5 x nominal anchor length + component thickness

Technical specifications

Characteristic values  LAL+6/ LAL+8/ LAL+10/ LAL+12

• Inside diameter of thread: M6/ M8 /M10/ M12
• Nominal drill diameter d0: 8mm/ 10 mm/ 12 mm/ 15mm
• Effective Embedment depth hef: 25mm/30mm/ 40mm/ 50mm
• Max. installation depth Ls,max: 11 mm/ 13 mm/ 16 mm/ 23 mm
• Min. installation depth Ls,min:6 mm/ 8 mm/ 10 mm/ 12 mm
• Through hole diameter in the attached part df: 7 mm/  9 mm/ 12 mm/ 14 mm
• Maximum Installation torque Tinst max: 4 Nm/ 8 Nm/ 15 Nm/ 35 Nm

Used to attach step irons in wastewater revision chutes. The special plastic sleeves prevent bimetallic corrosion between the step iron and the anchor.

To determine the characteristic load capacity in concrete, the approvals ETA-16/0107 and ETA-18/0861 have to be considered. To determine the characteristic load capacity in solid and perforated brick, approval ETA-16/0089 has to be considered.

• Diameter: 5.5 mm
• Drill capacity: 2.0 - 3.0 mm
• Drive: hexalobular TX 25
• Screw head diameter: 16 mm
• Screw head height: 2.0 mm
• Free spin zone under screw head: 6.0 mm
• Pre-drill diameter sleeve: 11 mm