Home & Outdoor

Used to attach step irons in wastewater revision chutes. The special plastic sleeves prevent bimetallic corrosion between the step iron and the anchor.

Technical specifications

Characteristic values  LAL+6/ LAL+8/ LAL+10/ LAL+12

• Inside diameter of thread: M6/ M8 /M10/ M12
• Nominal drill diameter d0: 8mm/ 10 mm/ 12 mm/ 15mm
• Effective Embedment depth hef: 25mm/30mm/ 40mm/ 50mm
• Max. installation depth Ls,max: 11 mm/ 13 mm/ 16 mm/ 23 mm
• Min. installation depth Ls,min:6 mm/ 8 mm/ 10 mm/ 12 mm
• Through hole diameter in the attached part df: 7 mm/  9 mm/ 12 mm/ 14 mm
• Maximum Installation torque Tinst max: 4 Nm/ 8 Nm/ 15 Nm/ 35 Nm

Technical specifications

• Galvanized zinc-plated steel
• Internal thread for metric screws and rods
• The suitable bolt length is 1-1.5 x nominal anchor length + component thickness

Approved for

• Cracked concrete
• Non-cracked concrete

Approved for;

• Cracked concrete
• Pre-stressed hollow core slab
• Non-cracked concrete
• Solid clay brick
• Solid sand-lime brick

• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

• Diameter: 5.5 mm
• Drill capacity: 2.0 - 3.0 mm
• Drive: hexalobular TX 25
• Screw head diameter: 16 mm
• Screw head height: 2.0 mm
• Free spin zone under screw head: 6.0 mm
• Pre-drill diameter sleeve: 11 mm

For mowing work in areas that are difficult to access. Great for mowing tasks, with metal tools and a nylon mowing head. Multi-function handle, loop handle, padded carrying system.

This spray gun has been specially designed to spray grease with a maximum viscosity of NLGI 2. The volumes of air and grease are individually adjustable. The maximum air pressure is 4 bar.

Proliner is a complete dent pulling kit, essential for repairing small, medium and big dents (sill, wheelhouse, car fender…)