• For sheet metal 10-16 gauge, thin metals 1/16 In. to 1/8 In. thick (ferrous and non-ferrous)
• 17-24 TPI progressive tooth design for smooth cuts in various thicknesses
• High-speed steel construction for maximum life in straight cuts
• 3-5/8 In. overall length, 2-5/8 In. working length
• Proper lubricant is recommended when cutting metal
• 5 piece pack

• Bosch offers the ideal accessories for virtually all applications
• Appropriate accessories for more efficient working
• Optimize accessories in line with the needs of users
• Flat Chisels 25mm Hex. 
• Shank flat chisel, 400mm.
• Quantity: Pack of 1.

• 25mm Hex Star point 400mm
• Content: 28mm Hex Star point 400mm

• SDS-Max drillbits are suitable for drilling into concrete, reinforced concrete, linestone and masonry
• The Ideal Drill Bit for the Professional

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• And occasional use in hardwood
• Suited to cutting parquet, laminate, epoxy
• Fine cut in plastic and non-ferrous metals
• Body and expansion slots lower vibrations,
• Dampen noise and reduce heat development

Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth guarantees solid and efficient cuts.

• Perfectly suited to cutting parquet, laminate, expoxy, glass fibre and cement-bonded fibre boards
• Very fine cut in plastic and non-ferrous metals
• Base Blade, dimensionally stable SK5 steel, hardened (>40 HRC)
• Tungsten carbide teeth
• Safe cuts thanks to negative (-5°) trapezoidal/flat teeth made of high-quality tungsten carbide
• Body and expansion slots lower vibrations, dampen noise and reduce heat development

• Maximum speed, power & top level user protection
• Full power & high performance due to new motor with +100W, Constant electronics for constant power& soft start with starting current limitation
• Longer endurance because of up to 1,7 times longer carbon brush lifetime, new stronger motor, direct cooling, and motor overload protection
• Superior user protection with KickBack Stop, AVH & Restart protection