• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter

• Pack of 10

• Metal Grinding Disc
• Depressed Centre
• A 30 T BF specification
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)

• Metal/Stone cutting disc
• Depressed centre
• For stone for high requirements
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)

• Metal Grinding Disc
• Depressed Centre
• A 30 T BF specification
• Appropriate for hand-held angle grinders
• Maximum circumferential speed 80 m/s (depending on rpm and disc diameter)

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 608 595 081) when working with HSS-G metal drill bits

We supply T244D AND TD144D depending on customers choice

• • Designed for straight and very fast cuts in wood, OSB and plywood 1/4 In. to 2-3/8 In. thick
  • 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in wood
  • 4 In. overall length, 3 In. usable length
  • 5 piece pack

Bosch DHU965CGB Built-in Under Hood (90 cm, Grey)
Adjustable glass visor and metal grease filter
Suitable for ducted or re-circulated extraction
Push button controls for 3 speeds
Twin motor and 120 mm diameter pipe
Extraction rate: at 350 m3/h, it quickly ensures optimal kitchen air quality.
Halogen lighting: for optimal, energy-efficient illumination of the hob.
Especially quiet: high performance at just 68 dB.
Active carbon filters efficiently trap the grease particles

GLL 2-50 Features:

• Horizontal vertical and cross line laser
• Self levelling laser with manual lock for slope marking
• Working range of up to 20 metres
• Extremely precise in use with an accuracy of ±3 mm at a distance of 10m
• Easy handling due to single-handed operation
  Robust design with softgrip covering protects against knocks
• Comes as standard with accessories for numerous different applications

BS 150 Tripod Features:

• Robust aluminium design
• Absolutely secure stance on any floor
• Functionality and precision due to box level
• Good transportability due to low weight

PKF375V14E Electric Ceramic Hob provides a professional cooking experience and will prove to be a valuable addition to the kitchen.

Raise the temperature

Available Model is PKF375CA1E