Application range

For Multifix USF 280 ml 

For Multifix USF Winter 300 ml 

For Multifix PSF 300 ml 

For Multifix VSF 300 ml 

For pressing-out of other various cartridges 280 / 300 ml (e.g. silicone)

Approved for

• Cracked concrete
• Non-cracked concrete

Approved for;

• Cracked concrete
• Pre-stressed hollow core slab
• Non-cracked concrete
• Solid clay brick
• Solid sand-lime brick

• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

LMN 300ml clear silicone is used for general sealing of laps and junctions.

• Power plants
• Guard rails
• Machinery
• Base plates
• For dynamic and seismic loads
• Small edge and center distances

• For installation in cracked concrete (option 1) and non-cracked concrete (option 7) (ETA-16/0107)
• For installation in masonry (ETA-16/0089)
• Approved for anchor rods M8, M10, M12, M16, M20, M24

Applications

• Facade scaffolds
• Temporary fastening
• Contact surfaces
• Shelves
• Cable racks
• Hand rails
• Battens
• Formworks

Applications

• For embedment in cracked and non-cracked concrete ≥ C20/25
• Also suitable for natural stone
• Dry indoor areas
• Wet areas
• Outdoors, including in industrial atmosphere and coastal environentsFor embedment of medium heavy to heavy fixings such as pillars, metal structures and wooden structures
• For pre-, push-through and distance installations
• Seismic approval category C2 (M10-M16)

• To form floating and fixed points on substructures of rear-ventilated facades
• Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles.