• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

Applications

• For embedment in cracked and non-cracked concrete ≥ C20/25
• Also suitable for natural stone
• Dry indoor areas
• Wet areas
• Outdoors, including in industrial atmosphere and coastal environentsFor embedment of medium heavy to heavy fixings such as pillars, metal structures and wooden structures
• For pre-, push-through and distance installations
• Seismic approval category C2 (M10-M16)

• For installation in cracked concrete (option 1) and non-cracked concrete (option 7) (ETA-16/0107)
• For installation in masonry (ETA-16/0089)
• Approved for anchor rods M8, M10, M12, M16, M20, M24

• Power plants
• Guard rails
• Machinery
• Base plates
• For dynamic and seismic loads
• Small edge and center distances

LMN 300ml clear silicone is used for general sealing of laps and junctions.

For safe, fast and efficient installation of EJOT® HTK 2G stress plates with EJOT Dabo® screws TKR, TKE and VHT-R.

• Up to 5 times higher fastening performance compared to conventional fastening solutions
• Fatigue-free working in upright position with consistently high installation performance
• Highest grade of reliability: EJOT Dabo® screw is always fastened at right angles to the roof surface

This EJOT socket wrench insert is for fastening all EJOT fasteners with hexagon head.

Technical specifications

Characteristic values  LAL+6/ LAL+8/ LAL+10/ LAL+12

• Inside diameter of thread: M6/ M8 /M10/ M12
• Nominal drill diameter d0: 8mm/ 10 mm/ 12 mm/ 15mm
• Effective Embedment depth hef: 25mm/30mm/ 40mm/ 50mm
• Max. installation depth Ls,max: 11 mm/ 13 mm/ 16 mm/ 23 mm
• Min. installation depth Ls,min:6 mm/ 8 mm/ 10 mm/ 12 mm
• Through hole diameter in the attached part df: 7 mm/  9 mm/ 12 mm/ 14 mm
• Maximum Installation torque Tinst max: 4 Nm/ 8 Nm/ 15 Nm/ 35 Nm

Used to attach step irons in wastewater revision chutes. The special plastic sleeves prevent bimetallic corrosion between the step iron and the anchor.