Product Description

There is no better tool than the carbide burr HF 100 D when it comes to the grinding of contours and the deburring of bore holes. Depending on the selected cut, the burr can be used on construction steel, NF metal, highly heat-resistant materials , and cast iron.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Features

• Hard-wearing 2.5 mm cutting-off wheel delivering top performance in any type of application 
• Stellar cutting performance plus long service life 
• Exceedingly wide range of possible 

Product Description

The carbide burr HF 100 F comes with a semi-circular design has been engineered for processing moulded parts in professional applications. The burr is used for such real-world applications as the milling of construction steel, NF metal, highly heat-resistant materials and cast iron.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The burr HF 100 H produces optimum results when used for processing moulded parts. Other possible applications for this milling tool are the grinding of contours, deburring and the removal of casting flash. The carbide burr also performs exceedingly well during such applications as fine grinding surfaces, chamfering and levelling weld seams. 

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The 40 piece burr set by Klingspor comprises burrs that come in all common shapes and sizes. Arranged in an easy-to-recognise order in a lockable presentation box, each carbide burr is always within easy reach. Each burr set includes two carbide burrs with a cylindrical shape and end cut, a cylindrical shape and ball end, a conical shape, a pointed conical shape, and a conical round nose.Each of these shapes is also available in different sizes. The carbide burr set HF 100 is the ideal companion tool for work performed with a flexible shaft.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The A 960 TZ Special, which Klingspor sells in the protective Kronenflex Box, is a thin cutting-off wheel for work on stainless steel, steel, cast material and mineral-based material. Since this cutting-off wheel is hard and free of iron, sulphur and chlorine, the cut surface on the workpiece cannot be contaminated by these substances.

Applications

• Steel
• Stainless steel
• Construction steel
• NF metals
• Cast materials
• Stone
• Plastics
• Mineral-based materials
• Solid materials
• Pipes
• Flat iron
• Tins

Product Description

The PS 22 K is a hook and loop abrasive disc designed to deliver a superior level of dependability and durability. Fixed in place with a synthetic resin, a high-quality velour fabric is bonded to the paper backing (E-paper). The abrasive disc PS 22 K helps the user save time when treating surfaces. The abrasive truly shines when used on wood and metal.

Product Description

The PS 22 K is a hook and loop abrasive disc designed to deliver a superior level of dependability and durability. Fixed in place with a synthetic resin, a high-quality velour fabric is bonded to the paper backing (E-paper). The abrasive disc PS 22 K helps the user save time when treating surfaces. The abrasive truly shines when used on wood and metal.

Product Description

The fibre discs CS 561 are designed for use on angle grinders. Its extensive selection of grit sizes makes the grinding disc CS 561 suitable for a wide range of applications. The medium and fine grit sizes allow for a high removal rate on steel and non-ferrous metal. The coarser grit sizes even allow the CS 561 to be used on wood or plastic. Its sturdy construction makes it possible to work at extremely high speeds.The wide selection of grit sizes turns the CS 561 into a highly versatile abrasive:

• Metal, 
• NE metal
• Plastic
• Wood.