Product Description

The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blades included in Klingspor's product line 600 Supra are powerful tools and ideally equipped for day-to-day use. The large diamond cutting blade DT 600 F Supra is the perfect tool for the professional and precise cutting of stoneware, tiles and glazed stove tiles.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blade DT 300 UT Extra is the ideal tool for the construction site as it will cut any type of construction materials as well as concrete and roofing tiles. It is also a recommended option for do-it-yourselfers as well as for all users who expect their tools to live up to professional standards. This diamond cutting blade is intended for use in combination with an angle grinder and comes in a variety of diameters.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Products Description

The diamond cutting blade DT 350 A Extra was developed for asphalt, sandstone and other hard materials. It sets itself apart with its aggressive cutting characteristics, long service life, powerful performance and an outstanding price/performance ratio. The cutting blade DT 350 A Extra possesses inclined protective segments, which keep the steel core safely protected and prevent relief-grinding of the steel core.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blade DT 350 A Extra was developed for asphalt, sandstone and other hard materials. It sets itself apart with its aggressive cutting characteristics, long service life, powerful performance and an outstanding price/performance ratio. The cutting blade DT 350 A Extra possesses inclined protective segments, which keep the steel core safely protected and prevent relief-grinding of the steel core.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

Klingspor’s standard gullet with laser-welded standard segments enables the large diamond cutting blade DT 350 U Extra to deliver both excellent feed rates and optimum cutting performance. This large cutting blade is in various diameters and matching segments widths. The segmented rim is particularly well suited for such abrasive materials as concrete or asphalt as well as other construction materials that commonly have to be cut in the gardening and landscaping sector or at building yards.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The PS 33 BK is based on a paper backing (B-paper) and ideally suited for surface sanding applications. The B-paper can be cut to size, torn off an bent with ease, making this abrasive disc equally suitable for hand sanding in hard-to-reach places if no abrasive paper is handy that is designed specifically for that purpose.

Applications

• Metals
• Wood and wood-based materials
• Paint / Varnish / Filler
• NF metals
• Plastic
• Stainless steel
• Glass
• Aluminium
• Titanium
• Leather
• Mineral-based materials
• Plastic

Product Description

The PS 33 BK is based on a paper backing (B-paper) and ideally suited for surface sanding applications. The B-paper can be cut to size, torn off an bent with ease, making this abrasive disc equally suitable for hand sanding in hard-to-reach places if no abrasive paper is handy that is designed specifically for that purpose.

Applications

• Metals
• Wood and wood-based materials
• Paint / Varnish / Filler
• Steel
• NF metals
• Plastic
• Stainless steel
• Glass
• Aluminium
• Titanium
• Leather
• Mineral-based materials
• Plastic

Features

• Hard-wearing 2.5 mm cutting-off wheel delivering top performance in any type of application 
• Stellar cutting performance plus long service life 
• Exceedingly wide range of possible 

Product Description

There is no better tool than the carbide burr HF 100 D when it comes to the grinding of contours and the deburring of bore holes. Depending on the selected cut, the burr can be used on construction steel, NF metal, highly heat-resistant materials , and cast iron.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics