Product Description

Mineral hydraulic oil with the classification type HLP acc. to DIN 51524 Part 2. Contains select agents to improve the aging resistance in the wear and corrosion protection as well as the EP properties. Ideally suited in systems in which high thermal loads may arise.Applicable in forestry and agricultural machinery such as excavators, tractors etc., hoists, industrial machinery and machine tools, wood splitters, lifting platforms and presses, etc.

First, thoroughly clean the surfaces to be polished and dry them carefully. Shake Hard Wax vigorously before use and pour onto a soft rag, polishing cloth or sponge. Apply thinly and evenly to the paint surface using circular movements. Only treat one section at a time. Allow Hard Wax to dry until it forms a matt coat. Polish the area using a clean, dry cloth. Do not use under direct heat or on warm paint surfaces. Regular application gives the optimum care.

Application

• Can be mixed with all commercially-available motor oils.
• Note the vehicle and engine manufacturers' operating instructions.
• Full effectiveness only achieved when the product is used on its own (i.e. no mixing).

Application

• Can be mixed with all commercially-available motor oils.
• Optimum effect obtained only when used on its own (i.e. no mixing).
• The operating instructions of the vehicle and engine manufacturers must be followed.

Application

• Can be mixed with all commercially-available motor oils.
• Optimum effect obtained only when used on its own (i.e. no mixing).
• The operating instructions of the vehicle and engine manufacturers must be followed.

Application

• Can be mixed with all commercially-available motor oils.
• Optimum effect obtained only when used on its own (i.e. no mixing).
• The operating instructions of the vehicle and engine manufacturers must be followed.