Features

- good corrosion protection

- easy to use - eliminates squeaks

- resistant to road salt and splash water

- extremely low friction - outstanding thermal stability

- outstandingly adherent

- ideally suited as a separating paste

First, thoroughly clean the surfaces to be polished and dry them carefully. Shake Hard Wax vigorously before use and pour onto a soft rag, polishing cloth or sponge. Apply thinly and evenly to the paint surface using circular movements. Only treat one section at a time. Allow Hard Wax to dry until it forms a matt coat. Polish the area using a clean, dry cloth. Do not use under direct heat or on warm paint surfaces. Regular application gives the optimum care.

Application

• Can be mixed with all commercially-available motor oils.
• Note the vehicle and engine manufacturers' operating instructions.
• Full effectiveness only achieved when the product is used on its own (i.e. no mixing).

Application

• Can be mixed with all commercially-available motor oils.
• Optimum effect obtained only when used on its own (i.e. no mixing).
• The operating instructions of the vehicle and engine manufacturers must be followed.

Application

• Can be mixed with all commercially-available motor oils.
• Optimum effect obtained only when used on its own (i.e. no mixing).
• The operating instructions of the vehicle and engine manufacturers must be followed.

Application

• Can be mixed with all commercially-available motor oils.
• Optimum effect obtained only when used on its own (i.e. no mixing).
• The operating instructions of the vehicle and engine manufacturers must be followed.