Tools

• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

• Up to 5 times higher fastening performance compared to conventional fastening solutions
• Fatigue-free working in upright position with consistently high installation performance
• Highest grade of reliability: EJOT Dabo® screw is always fastened at right angles to the roof surface

For safe, fast and efficient installation of EJOT® HTK 2G stress plates with EJOT Dabo® screws TKR, TKE and VHT-R.

Technical specifications

Characteristic values  LAL+6/ LAL+8/ LAL+10/ LAL+12

• Inside diameter of thread: M6/ M8 /M10/ M12
• Nominal drill diameter d0: 8mm/ 10 mm/ 12 mm/ 15mm
• Effective Embedment depth hef: 25mm/30mm/ 40mm/ 50mm
• Max. installation depth Ls,max: 11 mm/ 13 mm/ 16 mm/ 23 mm
• Min. installation depth Ls,min:6 mm/ 8 mm/ 10 mm/ 12 mm
• Through hole diameter in the attached part df: 7 mm/  9 mm/ 12 mm/ 14 mm
• Maximum Installation torque Tinst max: 4 Nm/ 8 Nm/ 15 Nm/ 35 Nm

Used to attach step irons in wastewater revision chutes. The special plastic sleeves prevent bimetallic corrosion between the step iron and the anchor.

Introducing the GYS GYSARC 300 TRI Inverter Stick Welder - your go-to professional 3-phase MMA welding solution. Engineered with cutting-edge electronic technology, this welder ensures exceptional welding performance for a wide range of applications. The GYSARC 300 TRI is a versatile and durable inverter, designed to thrive in challenging environments with its rugged casing and reinforced electronics, meeting IP23 protection standards.

Equipped to handle electrodes ranging from 1.6mm to 6.3mm, including basic, rutile, and cellulosic rods, this power-packed welder is your reliable partner for diverse welding tasks. Not just limited to welding, the GYSARC inverter is also capable of gouging, making it ideal for pre-weld preparation and weld removal.

The KRONOS 400T W is a multi-process, three-phase inverter welding unit with integrated cooling unit. Its cutting-edge technology ensures excellent arc characteristics for demanding MIG/MAG applications. Integrated synergies make set-up considerably easier and reduce spatter during welding. Its bright, easy-to-use interface provides precise control of welding parameters to ensure perfect quality.

KIT PUMP FRAME LIFTER AND PRESS FOR GREASE DRUMS 180-220 kg WITH PUMP R=20:1 12 kg/min

Details

They are necessary in service stations and garages,for checking and re-establishing the tyre pressure through the inflating gun with gauge scale 0–10 bar.

ACCESSORIES FOR TYRE INFLATORS