Tools

FIXED AUTOMATIC HOSE REELS FOR GREASE

INDUSTRIAL SPRING LOADED HOSE REELS FOR DIESEL

• Strict flatness control on each blade.
• Light float that can be handled by one person.
• Special high resistance aluminium alloy blade.
• Combination of light weight and heavy duty.
• Blade length from 1,5 to 3 metres.

Equipped with:

• Shoulder strap
• Plastic carry-along case
• Battery-operated grease-gun 20V Li-Ion
• 1000 mm flexible hose with 4-jaw coupler
• 1 Li-Ion battery 20V - 2000 mAh
• 1 Multi-purpose wide range input charger (12-240 V/ 50-60 Hz)

It is suitable for 400 g standard and screw Lube-Mec cartridges Ø 52 mm

Engine features:

• The world's first 360° inclinable 4-stroke engine, for operation in any position
• The OHC design driven by a maintenance-free, low-noise timing belt, makes the engine more compact and light
• Easy starting, low noise, and superb acceleration
• High-quality materials and purpose-built components ensure reliable long-term use
• Meets the world's most stringent environmental legislation
• Low fuel and oil consumption

This EJOT socket wrench insert is for fastening all EJOT fasteners with hexagon head.

• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

• Up to 5 times higher fastening performance compared to conventional fastening solutions
• Fatigue-free working in upright position with consistently high installation performance
• Highest grade of reliability: EJOT Dabo® screw is always fastened at right angles to the roof surface

For safe, fast and efficient installation of EJOT® HTK 2G stress plates with EJOT Dabo® screws TKR, TKE and VHT-R.

Technical specifications

Characteristic values  LAL+6/ LAL+8/ LAL+10/ LAL+12

• Inside diameter of thread: M6/ M8 /M10/ M12
• Nominal drill diameter d0: 8mm/ 10 mm/ 12 mm/ 15mm
• Effective Embedment depth hef: 25mm/30mm/ 40mm/ 50mm
• Max. installation depth Ls,max: 11 mm/ 13 mm/ 16 mm/ 23 mm
• Min. installation depth Ls,min:6 mm/ 8 mm/ 10 mm/ 12 mm
• Through hole diameter in the attached part df: 7 mm/  9 mm/ 12 mm/ 14 mm
• Maximum Installation torque Tinst max: 4 Nm/ 8 Nm/ 15 Nm/ 35 Nm