• Self-levelling 5-point horizontal and plumb laser for indoor work
• For precise transfer of right angles and reference points from the ground to the ceiling
• Working range of up to 30 m
• Dust and splash protection: IP5X
• Easy handling due to its very compact size
• Wide variety of fixing possibilities using the universal mount
• High levelling accuracy of ± 0.3 mm/m

• Provides three precise 360-Degree full plane coverage in both horizontal and vertical operations
• Versatile 360-degree 3-plane line laser: Level, align, plumb & square the entire room from one set-up point
• Smart Pendulum Lock: A self leveling pendulum system that locks when turned off for protection during transport
• 1/4-Inch Mounting Thread: Compatible with Bosch line lasers, point lasers and laser measures
• Precise height adjustment turn knob: Easily adjust tripod to selected height

What's Included

Processes

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• For sheet metal 10-16 gauge, thin metals 1/16 In. to 1/8 In. thick (ferrous and non-ferrous)
• 17-24 TPI progressive tooth design for smooth cuts in various thicknesses
• High-speed steel construction for maximum life in straight cuts
• 3-5/8 In. overall length, 2-5/8 In. working length
• Proper lubricant is recommended when cutting metal
• 5 piece pack

• Highly tear-resistant cotton fabric (type YX)
• Zirconia with fully synthetic resin bond
• Glass-fibre backing pad, bomb-shaped
• Especially suitable for working on stainless steel, steel, cast iron and sheet metal
• Powerful thanks to Zirconia/semi-friable aluminium oxide
• Consistently high material removal rate
• Long lifetime
• Angled version - for working on edges/welded seams and surface sanding at a work angle on 15-25°
• Vibration dampening

• Appropriate for hand-held angle grinders
• Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

• The low-cost solution in all building materials with clean cut edges.
• Sintered cutting rim.

• The basic diamond cutting disc that is a problem solver for concrete
• Laser-welded diamond cutting disc
• Safety product according to EN norm 13236
• With reduction ring 25.4/20mm