Tools

Features

• (1x) Worktop 1203*427*25mm
• (1x) Cabinet 750*472*1925mm
• (2x) Wall Cabinets 600*315*400mm.
• (1x) Cabinet 2 doors 600*410*825mm
• (1x) Cabinet 4 drawers 600*410*825mm

TOOL BOX WITH 7 COMPARTMENTS

The full- or part-circle pop-up rotor sprinkler shall be a single nozzle impact drive type, capable of covering a_____foot/meter radius at _____pounds per square inch(PSI) or (Bars) with a discharge rate of _____gallons per minute (gpm) or (l/s; m3 /h). The part-circle sprinkler shall have an infinitely adjustable arc of coverage from 20° to 340°. Full-circle (360°) shall be accomplished by disengaging the trip mechanism of the impact drive. The sprinkler case and internal assembly, except for the arm spring, bearing spring, wiper seal, and bearing washers, shall be constructed of durable engineered plastics. The rotation of the sprinkler shall be accomplished by a doubleweighted, horizontal-oscillating Precision Jet (PJ™) arm, actuated by the outlet water stream. The double-weighted arm shall provide for a slower rotation speed and increased distance of throw. The sprinkler shall have an adjustable diffuser pin for distance and distribution control and shall be capable of full- or part-circle operation. The sprinkler nozzle outlet trajectory shall be 23 degrees for the standard nozzles and 11 degrees for the low angle nozzles. The sprinkler shall have a strong, stainless steel retract spring for positive pop-down. Pop-up height shall be 3” (7,6 cm). The sprinkler shall have a multi-function, pressure-activated wiper seal for low pressure operation and for cleaning debris from the riser as it retracts into the case.

• the integrated Volt sensor signalises phase voltages by means of an acoustic signal and a red LED signal
• it localizes cable breaks and defective lamps in exposed cables (cable reel, light chains) via the feeding side of the phase
• it combines all basic measurement types and temperature measurement in an extremely compact housing

Benefit of GHG 500-2
The heat gun with the greatest ease of use

• Removable protective pipe
• Two main applications can be stored permanently, so that airflow and temperature are at the correct setting instantly
• Heating automatically switches off and cools when overheating, for long lifetime

Features 

• Makita Hss Ground point 10X133 mm
• Twist Bits - Drill Bits & Accessories
• Quality Makita accessories for power tools and garden tools
• Size: 100mm x 133mm
• Applications - Wood, Plastic, Copper, Nickel, Zinc, Sheet Steel, Cast Iron, Alloy Steel, Stainless Steel

A general purpose mortar and masonry drill bit suitable for workshop and maintenance

• Tungsten carbide tipped with roll forged flutes.
• Manufactured to DIN 8039 Standard 
• Drill Size Included - 5mm
• Number of piece - 1

Beta 90 Double ended deep offset ring wrenches

6x7-8x9-10x11-12x13
14x15-16x17-18x19
20x22-21x23-24x26
25x28-30x32 mm

Features 

• 7- socket wrenches with torx tip
• 9- 1/4 "socket wrenches with torx tip
• 4- 1/4" socket wrenches with hex tip
• 3- 1/4 "socket wrenches with ph tip