Tools

• Multifunction router: combination of plunge-cutting and copy router for perfect completion of all kinds of routing work
• SDS quick-change system: tight fitting of the separate motor block either in the plunge-cut or copy unit
• Compact and robust design thanks to sturdy and durable aluminium housing
• Extremely high precision thanks to fast fine adjustment of the routing depth to an accuracy of within 1/10 mm
• Optimum guidance and control of the copy router due to round wooden handles that are positioned very near to the workpiece
• Powerful 1400-watt motor with Constant-Electronic for constant cutting speed under load
• Smooth start and speed preselection for working to suit the material
• Safe bit changing without obstruction from the plunge-cut or copy unit
• Exact centring of the template guide to router bit for precise working with templates
• Template guide bayonet lock for tool-free changes
• Extremely easy bench-mounted use of the copy router in conjunction with a router table
• Extensive set of accessories in carrying case

• Integrated LEDs for a better view of the workpiece
• Metal hook for hanging up the tool during a work break
• Rubber-coated gear housing for a secure and comfortable grip
• Powerful 1100 W motor for fast sawing progress
• SDS for fast and convenient blade changes

• Powerful 250 watt motor with Constant Electronic for constant work progress in every application
• Slim grip circumference for more comfortable working in precision applications and continuous use
• Speed preselection for perfect adjustment to suit different accessories and work materials
• Rubber-coated handle surfaces enable comfortable work in different positions
• Easy, precise positioning on the workpiece due to oscillating motion. This enables accurate cutting and prevents damage to high-quality work materials
• Extensive range of accessories offers solutions for many applications
• Integrated ball grommet increases flexibility and prevents cable breaks

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits
• Pack of 10

• 200Lt 3HP Single-Stage Compressor

• Option for Shamal or Nauair available for this model not available.

Important - there is also the ABAC brand for the same model at an additional cost of 20% currently in stock.

• Option for Shamal - red or Nuair - Blue

• Fitted with a 1.2 Metre power cord and fused Plug.
• Capacity 255/9 L/min with a maximum working pressure at 10 bar (145 psi). Dimension - 800x390x750
• And come within warranty according terms of use.

Important - there is also the ABAC brand for the same model at an additional cost of 20%

• Large wheels and full front handle make for a very compact portable machine
• Fitted with F1-241 compressor pump unit for unbeatable reliability and performance
• 240L/minute capacity with a maximum working pressure of 10 bar (145 PSI)
• 1.5kW, 2HP Nuair electric motor
• 24 litre air tank capacity

• Extremely robust lever and spring construction for the highest work loads
• Powerful 2000 W motor with starting current limitation for fast work progress
• Tried-and-tested Bosch angle grinder motor provides superior product lifetime
• User-friendly quick clamping mechanism with continuously variable mitre angle setting up to 45°
• Vertical D-handle for ergonomic working
• Integrated handle for easy transport

• Strong and robust motor for longer lifetime
• Higher power for faster work progress
• Good dust insulation
• Ventilation holes specially designed for dust insulation and optimal air circulation
• Flat bearing flange with channel design to prevent dust accumulation
• Ergonomic handle with dimples and soft grip for anti-slip and extra handling comfort
• Optimized gripping space for extra comfort
• Clear view of cutting line at 45° and 90°
• Compact and adjustable base plate for 45° bevel cut

• Powerful 1150 watt motor for high material removal rate
• With SDS quick-locking nut for rapid disc changes without tools
• Cut-out carbon brushes for a high level of motor protection
• Lock-off switch prevents inadvertent activation
• Triple-control safety switch
• Good handling, also for left-handers