Tools

• Genuine replacement 
• long life span
• Spark plug for Hedge Trimmer

Product Description

The abrasive screen AN 400 sets itself apart with its flexibility and its extensive field of real-world applications. It can be mounted on all standard orbital sanders and used for surface sanding. Since it is self-fastening, the screen can always be attached to the tool quickly and with utmost ease and reliability.

The product is suitable for sanding on

• paint,
• varnish,
• filler,
• gel coat,
• plaster,
• plasterboard wall,
• composite material,
• wood, and
• wood-based material.

Product Description

The abrasive screen AN 400 sets itself apart with its flexibility and its extensive field of real-world applications . It can be mounted on all standard orbital sanders and used for surface sanding. Since it is self-fastening, the screen can always be attached to the tool quickly and with utmost ease and reliability.

The product is suitable for sanding on

• paint,
• varnish,
• filler,
• gel coat,
• plaster,
• plasterboard wall,
• composite material,
• wood, and
• wood-based material.

Features

• Hard-wearing 2.5 mm cutting-off wheel delivering top performance in any type of application
• Stellar cutting performance plus long service life 
• Exceedingly wide range of possible app

Features

• Hard-wearing 2.5 mm cutting-off wheel delivering top performance in any type of application 
• Stellar cutting performance plus long service life 
• Exceedingly wide range of possible 

Product Description

The carbide burr HF 100 F comes with a semi-circular design has been engineered for processing moulded parts in professional applications. The burr is used for such real-world applications as the milling of construction steel, NF metal, highly heat-resistant materials and cast iron.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The burr HF 100 H produces optimum results when used for processing moulded parts. Other possible applications for this milling tool are the grinding of contours, deburring and the removal of casting flash. The carbide burr also performs exceedingly well during such applications as fine grinding surfaces, chamfering and levelling weld seams. 

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The 40 piece burr set by Klingspor comprises burrs that come in all common shapes and sizes. Arranged in an easy-to-recognise order in a lockable presentation box, each carbide burr is always within easy reach. Each burr set includes two carbide burrs with a cylindrical shape and end cut, a cylindrical shape and ball end, a conical shape, a pointed conical shape, and a conical round nose.Each of these shapes is also available in different sizes. The carbide burr set HF 100 is the ideal companion tool for work performed with a flexible shaft.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blades included in Klingspor's product line 600 Supra are powerful tools and ideally equipped for day-to-day use. The large diamond cutting blade DT 600 F Supra is the perfect tool for the professional and precise cutting of stoneware, tiles and glazed stove tiles.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt