Hand Tools

Equipped with:

• Shoulder strap
• Plastic carry-along case
• Battery-operated grease-gun 20V Li-Ion
• 1000 mm flexible hose with 4-jaw coupler
• 1 Li-Ion battery 20V - 2000 mAh
• 1 Multi-purpose wide range input charger (12-240 V/ 50-60 Hz)

It is suitable for 400 g standard and screw Lube-Mec cartridges Ø 52 mm

SDS max RTec Speed Pointed Chisel is ideal for precision jobs in concrete without any work interruptions and with less jamming

• Self-sharpening twisted tip provides a wider material removal footprint, which allows for smooth work
• The RTec element delivers a higher material removal rate than standard pointed chisels
• Fits all SDS max rotary hammer drills.

SDS max Flat Chisel provides standard chiseling for various demolition applications in concrete and brick

• Good material removal on light applications is made possible by the flat cutting edge
• Fits all SDS max rotary hammer drills.

Details

They are necessary in service stations and garages,for checking and re-establishing the tyre pressure through the inflating gun with gauge scale 0–10 bar.

pipe cutter and tube flaring tool

Product Description

There is no better tool than the carbide burr HF 100 D when it comes to the grinding of contours and the deburring of bore holes. Depending on the selected cut, the burr can be used on construction steel, NF metal, highly heat-resistant materials , and cast iron.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The carbide burr HF 100 F comes with a semi-circular design has been engineered for processing moulded parts in professional applications. The burr is used for such real-world applications as the milling of construction steel, NF metal, highly heat-resistant materials and cast iron.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The burr HF 100 H produces optimum results when used for processing moulded parts. Other possible applications for this milling tool are the grinding of contours, deburring and the removal of casting flash. The carbide burr also performs exceedingly well during such applications as fine grinding surfaces, chamfering and levelling weld seams. 

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The 40 piece burr set by Klingspor comprises burrs that come in all common shapes and sizes. Arranged in an easy-to-recognise order in a lockable presentation box, each carbide burr is always within easy reach. Each burr set includes two carbide burrs with a cylindrical shape and end cut, a cylindrical shape and ball end, a conical shape, a pointed conical shape, and a conical round nose.Each of these shapes is also available in different sizes. The carbide burr set HF 100 is the ideal companion tool for work performed with a flexible shaft.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt