Hand Tools

Product Description

Applications

• Steel
• Stainless steel
• Construction steel
• NF metals
• Cast materials
• Stone
• Plastics
• Mineral-based materials
• Solid materials
• Pipes
• Flat iron
• Tins

Product Description

The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blades included in Klingspor's product line 600 Supra are powerful tools and ideally equipped for day-to-day use. The large diamond cutting blade DT 600 F Supra is the perfect tool for the professional and precise cutting of stoneware, tiles and glazed stove tiles.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blade DT 300 UT Extra is the ideal tool for the construction site as it will cut any type of construction materials as well as concrete and roofing tiles. It is also a recommended option for do-it-yourselfers as well as for all users who expect their tools to live up to professional standards. This diamond cutting blade is intended for use in combination with an angle grinder and comes in a variety of diameters.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The PS 22 K is a hook and loop abrasive disc designed to deliver a superior level of dependability and durability. Fixed in place with a synthetic resin, a high-quality velour fabric is bonded to the paper backing (E-paper). The abrasive disc PS 22 K helps the user save time when treating surfaces. The abrasive truly shines when used on wood and metal.

Product Description

The fibre discs CS 561 are designed for use on angle grinders. Its extensive selection of grit sizes makes the grinding disc CS 561 suitable for a wide range of applications. The medium and fine grit sizes allow for a high removal rate on steel and non-ferrous metal. The coarser grit sizes even allow the CS 561 to be used on wood or plastic. Its sturdy construction makes it possible to work at extremely high speeds.The wide selection of grit sizes turns the CS 561 into a highly versatile abrasive:

• Metal, 
• NE metal
• Plastic
• Wood.

Product Description

The fibre discs CS 561 are designed for use on angle grinders. Its extensive selection of grit sizes makes the grinding disc CS 561 suitable for a wide range of applications. The medium and fine grit sizes allow for a high removal rate on steel and non-ferrous metal. The coarser grit sizes even allow the CS 561 to be used on wood or plastic. Its sturdy construction makes it possible to work at extremely high speeds.The wide selection of grit sizes turns the CS 561 into a highly versatile abrasive:

• Metal, 
• NE metal
• Plastic
• Wood.

Product Description

The fibre discs CS 561 are designed for use on angle grinders. Its extensive selection of grit sizes makes the grinding disc CS 561 suitable for a wide range of applications. The medium and fine grit sizes allow for a high removal rate on steel and non-ferrous metal. The coarser grit sizes even allow the CS 561 to be used on wood or plastic. Its sturdy construction makes it possible to work at extremely high speeds.The wide selection of grit sizes turns the CS 561 into a highly versatile abrasive:

• Metal
• NE metal
• Plastic 
• Wood

Product Descripton

The fibre discs CS 561 are designed for use on angle grinders. Its extensive selection of grit sizes makes the grinding disc CS 561 suitable for a wide range of applications. The medium and fine grit sizes allow for a high removal rate on steel and non-ferrous metal. The coarser grit sizes even allow the CS 561 to be used on wood or plastic. Its sturdy construction makes it possible to work at extremely high speeds. The wide selection of grit sizes turns the CS 561 into a highly versatile abrasive:

. Metal

. NE metal

. Plastic 

. Wood.

Product Description

Ideal for producing a uniform finish, the medium backing pad conforms flexibly to the contours of the workpiece. It is uniquely suited for finer grinding as well as for the grinding of contours and the rounding of edges. The CS 561 fitted on hard backing pads is the tool of choice for jobs that call for rough grinding at high removal rates. The hard backing pad is an exceptionally fine choice for deburring and chamfering edges. The wide selection of grit sizes turns the CS 561 into a highly versatile abrasive:

. Metal

. NE metal

. Plastic 

. Wood