Power Tools & Accessories

Advantages: GLL 3-80  Professional

The compact Multi Line Laser for all indoor applications

• One horizontal and 2 vertical 360° lines enable many new applications for simultaneous marking, alignment and levelling indoors
• Self-levelling (4° in 4 sec), very precise (± 0.2 mm/m) and range of up to 80 m with receiver
• Compact, easy-to-handle and extremely robust (IP54)

Advantages: GOL 20 D Professional

Robust and reliable – ideal for outdoor use

• Ideal for outdoor use due to a robust housing with dust and splash protection (IP54)
• Fast aperture for excellent staff reading
• Compensator lock for safe transport
• Target collimator for rough alignment
• Penta prism makes it easy to read the circular vial
• Erect image
• Large focusing knob for easy alignment
• Fast aperture for a sharp image of the target (measuring rod)
• Endless degree/angle setting using knobs with friction-braked rotation

• 1Perfect for driving in tight spaces and hard-to-reach areas
• 2Optional angle screw and torque setting adaptor: For even more applications
• Magnetic bit holder
• Integrated LED light for illuminating the work area, even in dark places
• Soft rubber grip

• Robust 2000 watt motor, which has sufficient power reserves for large routing diameters (up to shank thickness of 12 mm) with its Constant Electronic
• Lockable setting wheels and clamp levers guarantee repeatable precision up to 1/10 mm accuracy, even during bench-mounted use
• The suspension of the plunge function can be switched off for more convenient working at large routing depths and in bench-mounted use
• SDS system for tool-free fitting of template guides
• Exact centring of the base plate for working with template guides
• Suitable for bench-mounted use

• Good handling due to ergonomic handle with softgrip
• Compact tool with only 2.5 kg – for comfortable working
• 6-stage speed preselection for working on a wide variety of materials
• Specially developed air inlets ensure optimum motor cooling for a long lifetime
• Triple-control safety switch for controlled switching-on of the machine
• Powerful 1400 watt motor with soft start for low-fatigue polishing of large surfaces
• Plastic-shielded gear housing with improved insulation
• D-handle for easy grip adjustment in different work positions
• Cut-out carbon brushes for a high level of motor protection

• HSS Step Drill M10-M40 (16 steps)
• High-speed steel (HSS) - ensures good cutting quality in virtually all materials
• Relief (axial and radial) - ensures maximum cutting performance and quiet running.
• Suitable for - cable glands

• 100% brand new and high quality. 
• Made from HSS-Co, heat treatment to it, high hardness, high wear resistance, high toughness, high bending strength, sharp edge, the best choice for processing stainless steel, better than ordinary step drill. 
• Unique step structure, a drill can punch out a variety diameters of holes.

• Step drill bit HSS-TiN - 6 - 30 mm, 10,0 mm, 93,5 mm

• Suitable for virtually all thin materials, e.g. non-ferrous metals, sheet steel, plastic or stainless steel.
• For burr-free drilling in thin sheet metals without pre-drilling. for deburring, for round holes, drilling several diameters with one drill bit, enlarging existing holes.
• Spiral flute for longer lifetime, less vibration and a faster drilling rate. 

• HSS step drill bits - 4 - 20 mm, 1/4", 70,5 mm

• Suitable for virtually all thin materials, e.g. non-ferrous metals, sheet steel, plastic or stainless steel.
• For burr-free drilling in thin sheet metals without pre-drilling. for deburring, for round holes, drilling several diameters with one drill bit, enlarging existing holes.
• Spiral flute for longer lifetime, less vibration and a faster drilling rate. 

• HSS step drill bits - 6 - 39 mm, 10,0 mm, 93,5 mm
• Suitable for virtually all thin materials, e.g. non-ferrous metals, sheet steel, plastic or stainless steel.
• For burr-free drilling in thin sheet metals without pre-drilling. for deburring, for round holes, drilling several diameters with one drill bit, enlarging existing holes.