Power Tools & Accessories

Product Description

The burr HF 100 H produces optimum results when used for processing moulded parts. Other possible applications for this milling tool are the grinding of contours, deburring and the removal of casting flash. The carbide burr also performs exceedingly well during such applications as fine grinding surfaces, chamfering and levelling weld seams. 

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The 40 piece burr set by Klingspor comprises burrs that come in all common shapes and sizes. Arranged in an easy-to-recognise order in a lockable presentation box, each carbide burr is always within easy reach. Each burr set includes two carbide burrs with a cylindrical shape and end cut, a cylindrical shape and ball end, a conical shape, a pointed conical shape, and a conical round nose.Each of these shapes is also available in different sizes. The carbide burr set HF 100 is the ideal companion tool for work performed with a flexible shaft.

Applications

• Construction steel
• soft NF metals
• hard NF metals
• creep-resistant materials
• Cast iron
• Plastics

Product Description

The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blade DT 300 UT Extra is the ideal tool for the construction site as it will cut any type of construction materials as well as concrete and roofing tiles. It is also a recommended option for do-it-yourselfers as well as for all users who expect their tools to live up to professional standards. This diamond cutting blade is intended for use in combination with an angle grinder and comes in a variety of diameters.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Products Description

The diamond cutting blade DT 350 A Extra was developed for asphalt, sandstone and other hard materials. It sets itself apart with its aggressive cutting characteristics, long service life, powerful performance and an outstanding price/performance ratio. The cutting blade DT 350 A Extra possesses inclined protective segments, which keep the steel core safely protected and prevent relief-grinding of the steel core.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Product Description

The diamond cutting blade DT 350 A Extra was developed for asphalt, sandstone and other hard materials. It sets itself apart with its aggressive cutting characteristics, long service life, powerful performance and an outstanding price/performance ratio. The cutting blade DT 350 A Extra possesses inclined protective segments, which keep the steel core safely protected and prevent relief-grinding of the steel core.

Applications

• Tiles
• Natural stones
• Granite
• Clinker
• Concrete
• Aerated concrete
• Roof tiles
• Masonry/Brickwork
• Chalky sandstone
• Firebrick
• Refractory brick
• Screed
• Asphalt

Features

• Hard-wearing 2.5 mm cutting-off wheel delivering top performance in any type of application
• Stellar cutting performance plus long service life •
• Exceedingly wide range of possible app

Application area (s)
Metal

Product Description

With the Kronenflex large cutting-off wheel A 330 Extra Klingspor is offering a powerful abrasive for processing metal. More specifically, this cutting-off wheel is used for cutting steel, stainless steel, aluminium, and castings.

Applications

• Steel
• Stainless steel
• Construction steel
• NF metals
• Cast materials
• Stone
• Plastics
• Mineral-based materials
• Solid materials
• Pipes
• Flat iron
• Tins

Product Description

Kronenflex cutting-off wheel A 46 TZ Special for stainless steel

The Kronenflex cutting-off wheel A 46 TZ Special has been designed especially for demanding tasks and cuts such materials as steel and stainless steel.

Applications

• Steel
• Stainless steel
• Construction steel
• NF metals
• Cast materials
• Stone
• Plastics
• Mineral-based materials
• Solid materials
• Pipes
• Flat iron
• Tins

Product Description

Kronenflex cutting-off wheels A 60 TZ Special are free of iron, sulphur and chlorine. These wheels allow the user to process stainless steel with ultimate speed and minimal tool pressure. 

Applications

• Steel
• Stainless steel
• Construction steel
• NF metals
• Cast materials
• Stone
• Plastics
• Mineral-based materials
• Solid materials
• Pipes
• Flat iron
• Tins