Power Tools

• Large wheels and full front handle make for a very compact portable machine
• Fitted with F1-241 compressor pump unit for unbeatable reliability and performance
• 240L/minute capacity with a maximum working pressure of 10 bar (145 PSI)
• 1.5kW, 2HP Nuair electric motor
• 24 litre air tank capacity

• The basic diamond cutting disc that is a problem solver for concrete
• Laser-welded diamond cutting disc
• Safety product according to EN norm 13236
• With reduction ring 25.4/20mm

• The low-cost solution in all building materials with clean cut edges.
• Sintered cutting rim.

• Appropriate for hand-held angle grinders
• Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

• Highly tear-resistant cotton fabric (type YX)
• Zirconia with fully synthetic resin bond
• Glass-fibre backing pad, bomb-shaped
• Especially suitable for working on stainless steel, steel, cast iron and sheet metal
• Powerful thanks to Zirconia/semi-friable aluminium oxide
• Consistently high material removal rate
• Long lifetime
• Angled version - for working on edges/welded seams and surface sanding at a work angle on 15-25°
• Vibration dampening

• For sheet metal 10-16 gauge, thin metals 1/16 In. to 1/8 In. thick (ferrous and non-ferrous)
• 17-24 TPI progressive tooth design for smooth cuts in various thicknesses
• High-speed steel construction for maximum life in straight cuts
• 3-5/8 In. overall length, 2-5/8 In. working length
• Proper lubricant is recommended when cutting metal
• 5 piece pack

• Perfectly suited to cutting parquet, laminate, expoxy, glass fibre and cement-bonded fibre boards
• Very fine cut in plastic and non-ferrous metals
• Base Blade, dimensionally stable SK5 steel, hardened (>40 HRC)
• Tungsten carbide teeth
• Safe cuts thanks to negative (-5°) trapezoidal/flat teeth made of high-quality tungsten carbide
• Body and expansion slots lower vibrations, dampen noise and reduce heat development

Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth guarantees solid and efficient cuts.

• And occasional use in hardwood
• Suited to cutting parquet, laminate, epoxy
• Fine cut in plastic and non-ferrous metals
• Body and expansion slots lower vibrations,
• Dampen noise and reduce heat development

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.