Product Description

Prism Pole is an ideal for measuring the elevation of a specific ground point by using a sight level, which is important if you want to get accurate results.

. Leica offers you its GLS11 rod with "Quick release" clamping by lever, telescopic from 1.23 m to 2.15 m.

. It has an adjustable 8 'spherical level . The graduation is done in cm and in ft .

. The tip is not interchangeable.

Product descriptions

• Extremely robust lever and spring construction for the highest work loads
• Powerful 2000 W motor with starting current limitation for fast work progress
• Tried-and-tested Bosch angle grinder motor provides superior product lifetime
• User-friendly quick clamping mechanism with continuously variable mitre angle setting up to 45°
• Vertical D-handle for ergonomic working
• Integrated handle for easy transport

• Bosch 2608602535 Diamond Cutting Disc Standard for Ceramic

• The basic diamond cutting disc that is a problem solver for concrete
• Laser-welded diamond cutting disc
• Safety product according to EN norm 13236
• With reduction ring 25.4/20mm

• The low-cost solution in all building materials with clean cut edges.
• Sintered cutting rim.

• Appropriate for hand-held angle grinders
• Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

• Highly tear-resistant cotton fabric (type YX)
• Zirconia with fully synthetic resin bond
• Glass-fibre backing pad, bomb-shaped
• Especially suitable for working on stainless steel, steel, cast iron and sheet metal
• Powerful thanks to Zirconia/semi-friable aluminium oxide
• Consistently high material removal rate
• Long lifetime
• Angled version - for working on edges/welded seams and surface sanding at a work angle on 15-25°
• Vibration dampening

• For sheet metal 10-16 gauge, thin metals 1/16 In. to 1/8 In. thick (ferrous and non-ferrous)
• 17-24 TPI progressive tooth design for smooth cuts in various thicknesses
• High-speed steel construction for maximum life in straight cuts
• 3-5/8 In. overall length, 2-5/8 In. working length
• Proper lubricant is recommended when cutting metal
• 5 piece pack

• Perfectly suited to cutting parquet, laminate, expoxy, glass fibre and cement-bonded fibre boards
• Very fine cut in plastic and non-ferrous metals
• Base Blade, dimensionally stable SK5 steel, hardened (>40 HRC)
• Tungsten carbide teeth
• Safe cuts thanks to negative (-5°) trapezoidal/flat teeth made of high-quality tungsten carbide
• Body and expansion slots lower vibrations, dampen noise and reduce heat development