Power Tools

FEATURES 

Professional belt sander with perfect weight distribution
electronically controlled belt speed
grinding belt reaches to the housing edge which allows grinding up against the wall
powerful suction into dust bag or external dust extraction outlet connectable
flat housing allows stationary use

Makita BO4901J Finishing Sander 115 x 280 mm 

Makita BO4901J Finishing Sander 115 x 280 mm has minimized vibration for reduced operator fatigue, with ergonomic handles for controlled operation and large clamp lever for easy install / removal of paper. It easily hooks up to a vacuum hose for superior dust collection and it’s integrated through-the-pad dust collection system with hook and loop type backing pad through-the-pad dust collection with Makita vacuum cleaner. 

PRODUCT DECRIPTION 

• High effciency and unrivalled low level of vibration
• The level of vibration is further reduced by completely separating the machine holding section from the motor/transission section
• Soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body
• New "Two on/off switches switchable in hammering mode"
• Easy-to-operate operation mode change lever

Included accessories: Side Handle, Side Grip, Depth Gauge, Grease Tube (Drill bit not included).

• Genuine Makita DC18RC Rapid Fast Li-ion / Ni-MH Battery Charger Part # 630718-5 (Black)
• Charges Li-ion and Ni-MH Battery Voltage : 7.2 V to 18 V
• Has cooling fan and active 3 controls
• Fast charging time for BL1850 18V 5.0Ah : 45 minutes
• Fast charging time for BL1840 18V 4.0Ah and BL1440 14.4V 4.0Ah : 36 minutes
• Fast charging time for BL1830 18V 3.0Ah and BL1430 14.4V 3.0Ah : 22 minutes
• Fast charging time for BL1820 18V 2.0Ah : 18 minutes
• Fast charging time for BL1815 18V 1.3Ah and BL1415 14.4V 1.3Ah : 15 minutes

• Electronics maintain constant wheel speed in all load conditions
• Improved air-flow for high torque brushless motor
• Anti-restart operator safety function
• DGA454 cordless angle grinder 115 mm, 18V, 2 x battery 3.0 Ah & charger

• Continuous rating input1,650W
• Capacityat 0 degrees:
• 90.5x95mm (3-9/16”x 3-3/4”)
• at 45 degrees:
• 90.5x67mm (3-9/16”x 2-5/8”)
• Blade diameter255-260mm (10”-10-1/4”)
• No load speed (rpm)4,600
• Dimensions530 x 476 x 532mm
• (L x W x H)(20-7/8”x 18-3/4”x21”)
• Net weight19kg (41.9lbs)
• Power supply cord2.5m (8.2ft)

• Robust construction with cast iron base.
• Bevel cuts to 45 degrees left.
• Positive stops at 9 miter angle settings; 15, 22.5, 30, 45degrees, right or left and 0 degree (90 degrees cuts).
• Pivoting fence provide efficient support to stock.

• Cutter blade for 90° V shaped groove as a standard accessory
• User-friendly blade cover design for easy blade change
• Depth adjustment dial
• Also can be used as a plunge cut circular saw by removing Skirt complete and replacing Cutter blade with 165mm Saw blade
• Blade available for 135° cutting (B-48860)

• Diameter (D)118 mm
• Kerf (K)18 mm
• Bore (B)20 mm
• Tooth Count 6
• Rake (R)5 º

FEATURES

• High performance Brushless DC motor
• Soft start
• Battery protection overload circuit
• Battery fuel gauge

• 2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
• Powerful 6.0 AMP motor with 0-2,800 RPM & 0-44,800 BPM for the most demanding applications
• Lightweight (4.3 lbs.) with large drilling capacity up to 5/8" in concrete
• Soft grip handle provides increased comfort on the job
• All-ball bearing construction for longer tool life
• Extended life brushes are longer for more work between service intervals and less downtime
• Recessed lock-on button for continuous use
• Keyless chuck for easy bit installation and removal
• Reversing switch is conveniently located
• Depth gauge for increased drilling consistency