• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter

• Pack of 10

• Perfectly suited to cutting parquet, laminate, expoxy, glass fibre and cement-bonded fibre boards
• Very fine cut in plastic and non-ferrous metals
• Base Blade, dimensionally stable SK5 steel, hardened (>40 HRC)
• Tungsten carbide teeth
• Safe cuts thanks to negative (-5°) trapezoidal/flat teeth made of high-quality tungsten carbide
• Body and expansion slots lower vibrations, dampen noise and reduce heat development

Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth guarantees solid and efficient cuts.

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels.
• Precision drill bits that are resistant to heat and wear.
• For use in drill stands or in pillar drills.
• The HSS-G drill bits are available in two qualities.
• The Topline drill bits are for the highest requirements and the standard drill bits are for professional use.

• Narrwo Crown Staple box of 5000pcs
• 30G 1.2/18g. 
• There are also avaiable these models: 20G 1.2/18g and 15G 1.2/18g.
• So customer can indicate the particular measurement of choice. 

•  Brad nailers are ideal for trim work and allow you to more easily reach tight spaces, improve nailing accuracy, and reduce work surface damage.
• There are available 15mm, 20mm, 25mm, 30mm and 35mm in stock.
• Customers are allowed to choose sizes before shipment. 

• Highest material removal rate and cutting performance in its class per battery charge
• Compact design and low weight (only 2.3 kg) for comfortable working, especially in tight spaces and overhead
• Innovative CoolPack batteries ensure optimum heat dissipation and therefore increase lifetime by up to 100% (cf. Li-Ion batteries without CoolPack)
• Practical battery charge level indicator: constantly shows how much energy is left in the battery
• Handle can be used on right or left
• No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells

• Extremely robust and durable 4-pole high-performance motor for a long lifetime
• Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and deep discharge
• Bosch Electronic Motor Protection (EMP) protects the motor against overload and ensures a long lifetime
• Gear head can be rotated in 90 degree steps
• Anti-rotation protective guard – quickly and easily adjustable, provides reliable protection

Demolition Hammer with SDS-max

GSH 5 CE Professional

Unbeatably powerful with up to 40% less vibration