Power Hammers

• Change lever positioned on the top of the machine for reduced possibility of breakage
• 3 mode - Rotary Drilling/Chiselling/Drilling
• Torque limiter
• One-touch sliding chuck forr east bit changes
• 24 Bit angle settings
• Electronic with: - Variable speed control by dial - LED service light that indicates when to replace carbon brush - LED power light that indicates trouble with the electric circuit - Soft start for suppressing start-upreaction
• Constant speed control

• Torque limiter: The drill stops when the bit hits against reinforcements.
• Triple operation mode: Rotary only, hammer only and rotary hammer.
• Soft start
• Constant speed under load
• Double Insulation
• Anti vibration technology
• Built-in job light

• One touch sliding chuck for easy bit installation and removal.
• Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.
• "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body.
• Unrivalled low level of vibration aided by vibration absorbing housing.
• LED service light indicates when to replace carbon brush.
• In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications.

• Two On/Off switches switchable in hammering mode
•  Electronic control with; Constant Speed Control, Soft Start, LED service light, LED power light
•  Torque Limiter
•  Easy to operate 2-mode change lever
•  Rotatable side grip
•  Soft grip provides comfort and control

• 2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
• Powerful 6.0 AMP motor with 0-2,800 RPM & 0-44,800 BPM for the most demanding applications
• Lightweight (4.3 lbs.) with large drilling capacity up to 5/8" in concrete
• Soft grip handle provides increased comfort on the job
• All-ball bearing construction for longer tool life
• Extended life brushes are longer for more work between service intervals and less downtime
• Recessed lock-on button for continuous use
• Keyless chuck for easy bit installation and removal
• Reversing switch is conveniently located
• Depth gauge for increased drilling consistency

• Tool set includes hammer drill HP 1641 and pendulum action jigsaw 4329
• HB 1641: power consumption: 680 Watt; No-load speed: 0 - 2,800 min-1; No-load impact rate: 0 - 44.800 min-1; Drilling capacity wood / steel / masonry: 30/13 / 16 mm, Chuck clamping width: 1.5 - 13 mm; Sound pressure level (LpA): 92 DB(a); Vibration drilling metal: 2,5 m/s2; Sound pressure level (LpA): 103 DB (a) K value noise; K value vibration: 1.5 m/s2; Weight: 2.0 kg
• 4329: power consumption: 450 Watt; Maximum number of stroke per minute: 500 - 3,100 min-1; Pendulum action: 3 plus neutral. Lifting height: 65 mm; Cutting of wood / steel: 65 / 6 mm – sound pressure level (LpA): 83 DB(a); Sound power level (LpA): 94 DB(a); K value sound: 3 DB(a); Vibration sawing wood: 7 m / s2; Vibration cutting metal: 5 m / s2; K value vibration: 1.5 m/s2; Weight: 1.9 kg.

The Makita DHR264Z is a 26mm cordless SDS+ plus rotary hammer drill based on model BHR262T but powered with 2x 18v batteries giving the equivalent power of a 36v machine. Also comes with a quick change chuck to allow for the use of standard straight shank drill bits.

SPECIFICATION

• Voltage: 36v (1x 18v)
• Battery capacity: Up to 5Ah
• Charge Time: 36 minutes for 4Ah, 22 minutes for 3Ah
• Max. in steel: 13mm
• Max. in wood: 32mm
• Max in concrete: 26mm
• No load speed: 0-1,200 rpm
• Impacts per minute: 0-4,800bpm
• Impact energy: 3.0 Joules
• Chuck type: SDS+ plus (quick change)
• Operation modes: 3 modes
• Net weight: 4.7kg

• Powerful torque of 588Nm for heavy duty applications
• Convenient rocker switch for one handed forward/reverse operation

DESCRIPTION 

Highest-in-class demolition efficiency. 63 Joules.

- Warning lamp indicates trouble with cord.

- Cylindrical tool holder with high reparability; new bolt holes can be drilled when the original bolt holes are clogged with broken bolt.

- Flat surface for ownership engraving or ID number labels.

- Name plate placed in the position almost free from damages and scratches.

- Double Insulation and HEX Shank. Tool sold without bit.

Features:

• AVT - Anti Vibration Technology
• Soft no load - slows the motor reducing vibration of the tool body under no load
• Soft start - suppressing the start up reaction
• 4 damper springs seperate the handles from the motor-transmission
• Highly durable switch design